Rivian Phone Charge Guide (Best for Android Pixel)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents phone from slipping outside of the charging area of the charging pad
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1207
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The only issue with my R1T properly charging was preventing the phone from slipping forward or slantways on the charging pad.
This fits my Pixel 6 and my wife's Pixel 7 (and similar sized phones). Simply ‘press’ the tabs into the recess on the factory charge pad area and it will otherwise sit flush and maintain itself.
Ideally, print with a material that will not be sensitive to temperature (PETG, Nylon, ASA, etc). but since this sits relatively flat, there's not much risk that even PLA would be a problem, as warp doesn't tend to occur in any meaningful way (at least in my experience).
If you need dimensions changed for a different phone form factor, just send me a message with your phone's overall length + width (include any cases you have in that dimension) and I'll spin something up for you.
EDIT 20240104: I was alerted to the fact that I failed to upload STEP or STL files! Oops!
They're attached for your convenience--if anyone needs anything else, including modifications, please reach out. Have a great day!