1 / 4
Serious Squeegee (3M P.A.-1 or Avery Alike) Open Source — zdjęcie 1
1 / 4

Serious Squeegee (3M P.A.-1 or Avery Alike) Open Source

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple squeegee based on 3M glod series P.A.-1 or Avery's, same flexibility, same size. Quick and easy, and pretty…

Ocena
5 / 5
Polubienia
50
Pobrania
515
Wydruki
2
Wyświetlenia
1497
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Simple squeegee based on 3M glod series P.A.-1 or Avery's, same flexibility, same size. Quick and easy, and pretty useful not much filament spent.

This is the ideal tool to apply build plates sheets like PEI, BuildTak, Kapton or Painter's tape. I use it also for vinyl wrapping, applying glue or resins, well everywhere you would need a good squeegee.

Print Settings

Printer:

Prusa I3, Tarantula, CoreXY, FLSun Delta.

Rafts:

No

Supports:

No

Resolution:

any

Infill:

100%


Notes:

So basic, there's not much to say...

Post-Printing =============

Improvements

Depending of the job to be done, you would like to wrap a soft material on a end to avoid scratches, a felt banding is good for vinyl, films or plexiglass. Microfiber banding is good for cleaning. EVA foam banding is good for glue, resin or water. Just keep this in mind if you need to.

Print a squeegee

Wrap double sided tape over a edge

Wrap felt, fabric, EVA foam over the tape. Simple as that.

Category: Hand Tools

Tagi