Clips for Interlocking Watter Bottle Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The interlocking mechanism wasn't tight enough, and the friction was too low, making glue an unfeasible option. :)
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 80
- Wydruki
- 2
- Wyświetlenia
- 568
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple clip designed to secure the interlocking water bottle rack in place, preventing it from slipping when bottles are being removed or added. This is especially useful if the rack isn’t positioned against a back wall, as in my case.
The clip fits tightly and requires some force to slide it over the bottom of the rack. Once in place, the racks stay secure and won’t shift back and forth.
If you have trouble fitting it, you can adjust the size in your slicer. Print it with a 0.2 mm layer height and avoid printing too quickly. This will give you three solid perimeters and eliminate the need for a brim.
The clip for the normal sized rack was designed based on the information provided by Mark