JBL Wireless microphone holder with 3/8 thread
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
microphone holder for JBL wireless microphone with 3/8 thread for standard stands
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 1036
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking for a holder for JBL wireless microphones. These mics are thick, so I had to draw my own mount.
The print consists of two parts and they are connected by an M6 screw.
I printed the holder from TPU and the other part, in which there is a thread, is printed from PLA.
The holder has an inner diameter of 30 mm. JBL wireless microphones have a diameter of 35 mm, so they hold well in the microphone holder.
I printed it with 0.6 nozzle
infill 45% no support
I use the holder and I am satisfied with it, so I offer it to you as well