Dummy Radial MkII Standard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dummy 9 cylinder radial engine for 22mm RC brushless outrunner electric airplane motors.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this dummy radial engine to add semi-scale detail to foam board model airplanes. It prints as a single piece with no supports using basic PLA filament. The dummy radial has pass-thru cooling to provide air flow over the motor and into the airframe for ESC cooling.
The dummy radial is designed to be mounted directly to the motor through my 3D printed firewall (see links below). You will need to use M3 x 18mm cap screws (purchase separately) to mount the firewall and dummy radial to the motor.
Firewall Flanged : https://www.printables.com/model/559807-firewall-flanged-standard
Firewall No Flange : https://www.printables.com/model/559884-firewall-no-flange-standard
Can be used with some Flite Test Simple/Swappable series models using FT Power Pack B and Power Pack C electronics.