Din Rail Mount for Adafruits Matrix Portal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you know when you want to mount your Adafruit Matrix Portal on a din rail so it does not get in the way of your LED…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Do you know when you want to mount your Adafruit Matrix Portal on a din rail so it does not get in the way of your LED panel solution?
You will need a 16 pin ribbon cable and two M3 Countersunk Flat Head Machine Screws. 14mm or 16mm long. Be sure the cable positions are correct.
You will need to print one tabs for this design.
They can be found at: https://www.thingiverse.com/thing:3401942
Print instructions
Unassociated tags: Din Rail
Category: Electronics Summary
Do you know when you want to mount your Adafruit Matrix Portal on a din rail so it does not get in the way of your LED panel solution?
You will need a 16 pin ribbon cable and two M3 Countersunk Flat Head Machine Screws. 14mm or 16mm long. Be sure the cable positions are correct.
You will need to print one tabs for this design.
They can be found at: https://www.thingiverse.com/thing:3401942
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.16
Infill:
10
</div>Filament:
inland PLA Black