1 / 4
Winchester SXP Defender Picatinny Rail/12ga Shell Side Saddle — zdjęcie 1
1 / 4

Winchester SXP Defender Picatinny Rail/12ga Shell Side Saddle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple side saddle with rail for the Winchester SXP shotgun.

Ocena
0 / 5
Polubienia
36
Pobrania
445
Wydruki
0
Wyświetlenia
3276
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece.

Instead of sourcing the very obscure #6-48 screws that the SXP series uses, I tapped the screw holes for M4 12mm screws. If you can find screws that fit the stock thread, I'm sure it will work fine with the rail if you install with washers.

This screw assortment has had me covered on most projects: https://amzn.to/3sggb2V

 

I also made versions for the left and double sided options. These however have not been tested, so please post makes of whichever one you choose!

 

This was printed in PETG with 5 walls and 30% infill with supports on my Creality K1 Max.

 

Thanks for checking out my design, happy printing!

 

Tagi