Basic MagSafe Stand for iPhone in Nightstand Mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An uncomplicated nightstand designed for the upcoming OS update's nightstand mode.
- Ocena
- 4,818 / 5
- Polubienia
- 82
- Pobrania
- 503
- Wydruki
- 14
- Wyświetlenia
- 1791
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This stand is made for holding the Apple Mag Safe Charger.
The stand is 3D printed in the orientation it would be placed on the nightstand, with support structures enabled throughout. The recommended print settings include a layer height of 0.10mm for fine detail and a 30% infill density. A minor support structure is generated at the rear of the stand, keeping the design otherwise straightforward. PLA filament was utilized for the primary version.
Furthermore, a secondary file is included for the flex filament variation. This version is designed to accommodate a rubber base, which can be affixed using double-sided tape, while also serving the purpose of securing the cord in place.