AWQP: 12v Battery Mount for the Low Cost Sampler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount will fit a 12volt 9 ah battery and hold a Morningstar SunSaver 6A PWM Solar Charge Controller.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
12-Volt Battery Mount for Low-Cost IoT Water Sampler
This 3D-printable battery mount is designed to securely hold a 12-volt battery for the Low-Cost IoT Water Sampler (LCS), developed by the Colorado State University Agricultural Water Quality Program (AWQP). Agriculture can be a source of nutrient pollution in State and Federal waters, with nutrients like nitrogen and phosphorus running off farmlands and accumulating in surface waterways, leading to water quality issues.
It is encouraged to adopt Best Management Practices (BMPs) to protect surface water quality. Quantifying the impact of BMPs requires robust, edge-of-field (EoF) monitoring systems that can accurately measure flow and collect water for nutrient and sediment analysis. However, the sampling equipment is often too costly for scalable research.
To address this need, the CSU AWQP has developed a low-cost, automated water sampler with IoT technology for scalable, near-real-time water quality research. This project is part of deliverables from an awarded NRCS Conservation Innovation Grant titled, “Next Generation Technology for Monitoring Edge-of-Field Water Quality in Organic Agriculture”. The CSU AWQP aims to create additional research and regulation opportunities for Colorado and beyond using this innovative technology.
Features:
- Compatible with standard 12-volt 7-9ah batteries used in the sampler.
- Durable and weather-resistant design for outdoor use.
- Easy to install and remove for battery maintenance or replacement.
- Optimized for 3D printing with no support material required.
Print Settings:
- Material: PETG, ASA, or ABS (recommended for durability).
- Infill: 100% for strength and weight.
- Layer Height: 0.2mm for a smooth finish.
GitHub Project Link: Low-Cost IoT Water Sampler
Visit Our Website: For more information about our program and research, visit waterquality.colostate.edu.
Download the STL file and contribute to the project today! Perfect for researchers, hobbyists, and anyone interested in affordable, open-source water quality monitoring solutions.
2/3/25 - Added Fusion350 file and added files with L and R for left and right.