String Threader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ever pulled that string on your hoodie or your PJ pants a little too far and now it's out?
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 927
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
ever pulled that string on your hoodie or your PJ pants a little too far and now it's out? you can try and rethread it with a safety pin or a straw or just loop or tie it to this tool and thread it right back in under 30 secs.
the pencil portion is 8mm so if you have trouble with your string tunnel not being that big, scale it down by 30 or 40% without having to redesign the whole thing
VERSION2 HAS A POINTED TIP IN CASE YOU NEED THAT TO ADVANCE IT EASIER. may need supports to print the tip depending on your printer
Print instructions
Category: Tools Summary
ever pulled that string on your hoodie or your PJ pants a little too far and now it's out? you can try and rethread it with a safety pin or a straw or just loop or tie it to this tool and thread it right back in under 30 secs.
the pencil portion is 8mm so if you have trouble with your string tunnel not being that big, scale it down by 30 or 40% without having to redesign the whole thing
VERSION2 HAS A POINTED TIP IN CASE YOU NEED THAT TO ADVANCE IT EASIER. may need supports to print the tip depending on your printer
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
</div>Rafts:No
Supports:
No
</div>Resolution:0.3
Infill:
5%
</div>Notes:
I printed mine with 4 shells and 5% infill. it allows the loop portion to be a little more flexible so it can expand to take on larger strings or knots. the narrow points allow you to wedge the string in without tying it. but if it doesn't work then just tie it on and pull it through.