1 / 1
bambu X1c filiment Y from side — zdjęcie 1

bambu X1c filiment Y from side

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows AMS plugged in one of the Y and 1 for filaments on the side mounted roll. Making it easier to loaded from side.

Ocena
0 / 5
Polubienia
112
Pobrania
529
Wydruki
2
Wyświetlenia
3030
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Allows AMS system to be plugged in one of the Y and 1 for filaments on the side mounted roll. Making it easier to load from the side, those filaments that don't work with the AMS, like TPU.

This need support. I found it better to print it upside down to minimize the support needed. You will want to specify where the support is added on where not. It is practically impossible to remove the support on the inside.  You will want to section the model and tell the slicer to NOT support the inside.

The mount on the side sticks out a little to make it friendly with the spool on the side.

https://www.printables.com/model/560164-poop-shoot-and-spool-holder

push the TPFE tube in as far as it goes. It helps reduce the friction on the inside of the Y