Rubber Stamp Remix - Customizable in PrusaSlicer :)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Changed a few things and added different sizes.
- Ocena
- 5 / 5
- Polubienia
- 146
- Pobrania
- 294
- Wydruki
- 2
- Wyświetlenia
- 1804
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to have a stamp for some applications and found the nice design by LoboCNC.
For one thing, I didn't find the handle quite ergonomic yet, and my main problem was that I always transferred the locking points onto the paper with it :) Also, I occasionally mixed up top and bottom when I wasn't paying attention. The one size is great but since the LoboCNC design is not scalable, I generated other sizes of the stamp.
So here is my revised version.
After printing, I cleanly trimmed off the slight overhangs (if any) under the locking points with a knife and lightly sanded the TPU text boxes with fine sandpaper.
Information on how to label the text fields in PrusaSlicer can be found in the original design:
https://www.printables.com/model/517660-rubber-stamp-customizable-in-prusaslicer
Have fun and keep printin!
I printed the Stamp in PLA and the Textfield in TPU. 0,4 mm Nozzle
The textfields locking points are compatible with LoboCNC's Stamp.