1 / 2
Hydroponic System for HSW
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular drip hydroponics system for the Honeycomb Storage Wall
- Ocena
- 0 / 5
- Polubienia
- 254
- Pobrania
- 335
- Wydruki
- 0
- Wyświetlenia
- 5175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 9)Remiksy (0)Kolekcje (484)Powiązane
Modular drip hydroponics system for the Honeycomb storage wall!
Update 2023-09-27: One discovered shortcoming of the system is that it can become clogged by plant roots - working on a design revision to try to address this.
Update 2023-09-06: Added STL files for ease of printing, and moved the original STEP models into their own folder.
Non-printed parts:
- ¼" OD tubing (typically sold as RO tubing)
- RO push to connect fittings for ¼" OD tubing (these should work)
- A water pump of your choice (I used this one)
- Fittings to connect the water pump to your RO tubing (this should work)
- ½ GPH flow regulated drip emitters
- A bucket
- A timer for your pump (and grow lights if you have them)
- Grow media, LECA works well
- Nutrients, I use General Hydroponics Maxi series of dry nutrients
