Ultimate Gamesir X2 Legion Y700 Tablet Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grip system to attach to a Gamesir X2 (Pro) and Y700 tablet to create a more ergonomic feel.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 4351
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 4 piece model that enhances a Y700 tablet and gamesir x2 pro controller to be more ergonomic. Parts of the design are inspired by https://www.thingiverse.com/thing:5907243 .
Optionally, you may want to print the “Gamesir Spacer” from that above project to cover the springs on the back of the unit.
I printed the handles/grips upright with a brim, the cross bar face down (diagonal to fit on print bed), and the tablet support face up. All were printed at .2 with a .4 nozzle on a modified Elegoo Neptune 2S in matte black overture PLA.
All parts fit together using 6 M3x6 screws, any adhesive is optional. Depending on your print tolerances you may need to use a smaller screw to open up the holes a bit.
The right side handle has a hole/channel to accommodate a usb-c extender or cable (with a small plug). If you don't want it you can print the left handle mirrored (they are the same other than the hole).