Earmuffs - Magnetic Belt Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
3,95 € – 4,83 € netto (bez VAT)
Dla pliku: Ear Muff Holder PETG ver2_0.2mm_PETG_MK3S_4h33m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,39 € netto (środek widełek).
- Masa podana przez autora
- 50 g
- Czas druku podany przez autora
- 4,79 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Never leave your earmuffs behind with this quick release, magnetic holder that goes with you, wherever you go!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Your hearing should never be taken for granted. If you already use earmuffs to protect your hearing, great!! This EDC device is for you! Whether you are at the range, in the workplace or in your workshop, you will appreciate this quick release, magnetic earmuff holder that goes with you, wherever you go!
Medical warning
This device uses strong magnets and may not be suitable for certain medical devices. If you have concerns, please consult your doctor before using this product.
How it works
This device lets you magnetically stow your earmuffs to your belt when not in use!! Cool right? You attach part A to your belt or simply place it in your pant pocket. Attach part B to the center headband of your earmuffs. Use two zip ties through the slots provided to secure it to the headband strap. (See attached photos.) The two strong magnets will secure your earmuffs until you need them. You may wish to add a piece of foam to the underside of part B for optimal comfort.
Settings
This is a working device. Are you going to be using this or storing it in a hot environment such as your car? If so, you may want to use ASA filament. Otherwise, use PETG or ABS filament, .2 mm layer height, quality setting in Prusa Slicer, .4 nozzle, 15% infill, organic supports are required on part B.
Layers thickness;
4 bottom
4 sides
4 top
The Magnets
Two magnets are required for this project. They are polarized. You may want to mark the polarity with a Sharpie. The magnets are super glued into a pocket in parts A & B. You must glue the orientation of the magnets correctly, otherwise they will repel each other. These are strong magnets!! Handle with care. (See link below.) https://www.mcmaster.com/product/5862K175
Cable Ties
2 req’d. 1.34 mm x 4.4 mm x 275 mm long.
Part Orientation
You may be tempted to orient the parts differently but we recommend using the parts orientation shown in the g-code file. This is specifically for functional part strength. If you do not use a bed adhesive, you may want a brim for both parts.
We use Layerneer Bed Weld exclusively on all our prints. “This is the way!!”
Thanks for posting your makes.
Regards,
-Printium 3D