Artistic Vase HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Hueforge print made from the thumbnail of my fin vase model.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
This is a Hueforge print made from the thumbnail of my fin vase model. It only uses four colors and is more abstract than realistic in design. As time passes, I hope to improve my skills at Hueforge and make even better prints with it.
-If you want access to my Member exclusive discord and email list, you can also go and support me on Thangs, with all of the perks of my club here on printables and more, including my entire library of free and premium models: https://thangs.com/designer/RWB%20Designs
Print Intructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
ASA PolyLite Black Transmission Distance: 0.3
ASA PolyLite Blue Transmission Distance: 0.3
ASA PolyLite PolyMaker Teal Transmission Distance: 0.5
ASA PolyLite White Transmission Distance: 0.5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #13 (1.12mm) swap to PolyMaker Teal
At layer #16 (1.36mm) swap to White for the rest.