Customizable Large Ice Cubes Mold Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mold to make an ice cube tray of varying ice cube sizes.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Mold to make an ice cube tray of varying sizes.
You'll find a model to produce either 20 30mm*30mm*30mm or 5 135mm*30mm*30mm ice cubes tray.
A blank mold template (and a step file) is also provided if you want to customize the ice cube size and placements. Make sure the Z height of your custom shapes do not exceed 35mm (the total Z height should not exceed 45mm (10mm for the bottom of the mold and 35 for the custom shape)). The silicone tray will need about 2.5 to 5mm above your custom shapes to be structurally strong.
Fill the mold with food grade silicone - I used 30A silicone, using 15A to 60A shore hardness is recommended. Be patient when removing the cured silicone, you might want to use a fine blade to scrape the sides and separate the silicone tray from the mold.
For the 20 ice cubes version you will need between 420 to 480 ml of silicone (more silicone will produce a thicker "floor" for the ice cube tray - 420ml will produce a 5mm bottom layer and the silicone should stop at about 5mm from the top of the mold))
For the 5 ice cubes version you will need between 350 to 410 ml of silicone (more silicone will produce a thicker "floor" for the ice cube tray - 350ml will produce a 5mm bottom layer and the silicone should stop at about 5mm from the top of the mold)
Printed at 0.20mm layer height with two wall loops and 10% infill without supports.
Tips:
- Make sure to clean and dry the model thoroughly before pouring the silicone.
- Tape the seam to assure it doesn't leak.
- Use C clamps on both ends to ensure it stays securely closed during the curing process.
- Follow the instructions of your silicone mold kit.
Updates:
- Increased the height of the sides to prevent silicone spills - No need to completely fill the mold with silicone. Stop pouring at about 5mm from the top for a 5mm floor thickness.