Triskelion Coasters with Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coasters with embossed Triskelion. Stand/holder in 4 different sizes included. Double-sided.
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
The coasters have a diameter of 90mm. The stands are designed for 6, 8, 10 or 12 coasters.
Best printed using a multi-material or dual extruder printer. In this case you can print the logo on both sides (one flat and one embossed). A pre-coloured 3mf file is included.
Otherwise you have to swap the filament after 2mm.
The stand/holder is best printed with 3 walls. I used ironing.