Nest Thermostat wall mount for HOLACA stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount for the HOLACA stand that fits the Nest 2nd and 3rd edition thermostat
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After re-arranging our living room, our Nest thermostat would not connect to the control box due to the close proximity of a large TV.
I actually liked the HOLACA stand that it was attached to but decided to move it elsewhere and mount it on a wall instead.
This model was designed purely within Prusa Slicer (because I am useless with CAD) but it has worked very well so decided to publish the model here.
The model has cable management to keep things tidy although the cable has to be in place before attaching it to the wall.
V1 has been designed to be screw mounted - drilling template also available for download - while V2 can be mounted with double-sided tape. V3 has now also been added which has a single mounting hole.
There is a recess for the HOLACA stand to sit on making the whole thing very secure.
I printed the model at 20% infill with a 0.6mm nozzle and 0.3mm layer height.
The model does need printing with supports everywhere and I used organic support which worked very well