RC Straightaway SAW Mono Boat (Mold) very fast
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3d printable mold for a RC racebot hull. the boat is made only to go fast in a straight line. We ran this…
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 3471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 3d printable mold for a RC racebot hull.
The boat holds 4 records in the classes
1s LiPo: L1 Mono 92,38 km/h
2s LiPo: L2 Mono 133,75 km/h
3s Lipo: L3 Mono 159,42 km/h
4s Lipo: L4 Mono 160,03 km/h
All setups were equiped with 2 Motors.
Additional to that i made a competely 3d printed version.
get it here:
https://cults3d.com/:1450635
The mold was printed in pla and then coated with wax to prevent the epoxy sticking to it.
But the surface finish was't that good. so I recommend to print it in petg or abs and then filler and paint it.
also check out my Instagram for videos of the boat (same user name)