1 / 4
Lid for Ikea Shelf GNEDBY
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid for Ikea Shelf GNEDBY with magnetic shelf support
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Lid for Ikea Shelf GNEDBY
Materials Needed:
- Filament material (PLA or PETG)
- Magnetic catches, Shelf supports (printed with support)
- Lid (printed with support)
- Magnets 8x3mm
- Clue
Steps:
Gluing Magnets into the 2 Magnetic Catches:
- Apply adhesive to the magnet.
- Insert the magnet into the corresponding recesses of the magnetic catches.
- Allow the adhesive to cure, ensuring that the magnets are securely attached to the catches.
Gluing Magnets into the 2 Recesses on the Back of the Lid:
- Apply adhesive to the magnet.
- Place the magnet into the recesses on the back of the lid.
- Allow the adhesive to cure, ensuring that the magnets are securely attached to the lid.
Aligning the Lid:
Insert Shelf Support into Desired Holes First:
- Place the shelf support into the desired holes on the shelf.
Place the Lid and Align Which Holes the Magnetic Catches Go Into:
- Position the lid onto the shelf.
- Determine which holes on the lid align with the magnetic catches on the shelf.
Insert Magnetic Catches into the Pre-Determined Holes and Align Magnets Forward:
- Insert the magnetic catches into the pre-determined holes on the shelf.
- Ensure that the magnets within the catches are aligned forward to ensure proper attraction.
Remember to allow the adhesive to fully cure before using the lid and magnetic catches. This ensures that the magnets are securely attached and function properly.