Print-in-place springy cable mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get rid of hanging cables! Quick print that can greatly improve organization. Print as oriented.
- Ocena
- 5 / 5
- Polubienia
- 252
- Pobrania
- 1139
- Wydruki
- 23
- Wyświetlenia
- 4906
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Get rid of hanging cables! Quick print that can greatly improve organization. Print as oriented. Cables should get in with satisfying click.
Print instructions
It was designed and tested on 0.4mm nozzle - users report that 0.6mm do not work.
Print as oriented, best in PETG as it's more "springy", but PLA works too. Cables will go in with satisfying click, and are easy to take out, so changes are easy.
Screw holes are 3.5mm in diameter.
If you are looking for something that will make your cables shorter here is my other design - https://www.prusaprinters.org/prints/55717-cable-organizer
EDIT:
As requested - I added multiple versions - for mounting in a less temporary way with tape as well as command strips.
And source files so you can make changes on your own if you need. Also changed license.