Stackable Slidable Boxes o' Bitses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a series of stackable and slidable boxes I made. Each one can slide into each other.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
These are boxes that are endless stackable. They have thick rails for the sliding mechanism as I noticed similar boxes had pretty thin rails. I use them to hold board game bits but they can be used for anything and can be scaled up or down.
I printed these with a brim since the corners were warping. This might happen to you even with dialed-in settings due to the nature of the corners/overhangs that allow these to slide into one another.
The tolerances are good but you may need to slide each piece back-and-forth a few times to scrape off any excess filament build up.
I included a lid with no text as well.