1 / 6
Insulin case for two 10ml bottles - 8x2mm magnets version — zdjęcie 1
1 / 6

Insulin case for two 10ml bottles - 8x2mm magnets version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This remix is based on the original model using different magnet sizes (8 x 2mm)

Ocena
0 / 5
Polubienia
30
Pobrania
151
Wydruki
1
Wyświetlenia
641
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This remix is based on the original model of JoerT.

The original design used magnets of 5x5 which I didn't have available. So I made a modified design that uses 4 magnets of 8x2mm (two in each part)

I printed it for someone else (not using insuline myself) for NovoRapid bottles, she's really happy with it.
Please do mind the polarity of the magnets. Depending on the precision of your printer, you might have to use some glue. The holes are 8.2mm x 2mm.

On request, I can create other sizes too. Thanks for the original creator for sharing the .step file, which made the modification slightly easier. I have shared my .f3d file for the same reason.

 

If you like this remix, press the like button, post your make or let me know using a comment!

Tagi