1 / 6
Lenovo Ideapad Z580 Webcam Enclosure — zdjęcie 1
1 / 6

Lenovo Ideapad Z580 Webcam Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an enclosure I made in order to house the webcam taken from a Lenovo Ideapad Z580.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is an enclosure I made in order to house the webcam taken from a Lenovo Ideapad Z580 with a hole so that the camera activity LED can shine through. I also made a sort of clip in order to mount the webcam to a monitor (it's made to fit an AOC E2180SW monitor but may work with others).

To mount the camera inside the enclosure I used a thin double sided tape to stick it to the inside of the housing and the press fitted the lid. If you find that the lid is loose you can use glue to fix it in place I guess.

Then, for mounting the camera to the monitor clip I just used super glue to stick the housing to the clip.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

100%

Filament: 3N3 PLA Celeste


Notes:

This is how I printed it, you can print it with any settings you want as this is not a hard print.

Category: DIY

Tagi