Adapter Rings for 250g Eryone cardboard spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips modified from original design for a more tight fit with the cardboard version of the 250 Eryone spools.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 466
- Wydruki
- 9
- Wyświetlenia
- 2714
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
First of all, big thanks to the creator (MediaMan3D) of the original adapter rings and clips; great design and work!
The original designer has created an adapter ring and clips that fits the plastic spools of Eryone, but the clips do not play nice with the new cardboard versions that are being delivered nowadays.
I have adapted the clips to make the clips fit tight (without damaging the cardboard). Advise; first push the clip to the cardboard before pushing it in the hole to prevent damage at installation.
Original Eryone 150mm adapter ring included (unmodified, created by MediaMan3D).
So you need to print:
- 2x Spool Adapter (each side of course)
- 1x Full set of clips (containing all 6 clips)
Or:
- 2x Spool Adapter (each side of course)
- 2x clip A
- 2x clip B
- 2x clip C
I imagine people first want to print a single clip and with separate models it's easier.
If you like this remix, press the like button, post your make or let me know using a comment!