Lite Base for Gridfinity Storage Box by Pred *Now Parametric!*
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The amazing storage box by Pred, now w/ ~100g in filament savings & 2-4 hours of time savings (5x4x6U). Now parametric!
- Ocena
- 5 / 5
- Polubienia
- 323
- Pobrania
- 1522
- Wydruki
- 18
- Wyświetlenia
- 7513
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Update (8/29/23):
Now Parametric! I've also included lite STLs for common sizes from the original page.
-------------------------------------
I loved the idea for the original Gridfinity storage box, but I felt it would be a waste of time and filament to print with a fully solid bottom for my uses, especially knowing how sturdy the gridfinity bins are on their own.
So once the parametric files were released, I took it upon myself to remove a lot of material from the base. Doing so took the filament consumption down from ~260g to ~160g. I saw my print time go from nearly 13 hours to about 9.5 using the 0.3mm DRAFT preset for the MK3S+ in PrusaSlicer and 20% infill.
The bottoms of the gridfinity bins are plenty thick on their own, and honestly, I like the look of the bottom of the box better now. It is nice to let the colors and shapes show through rather than just a completely flat bottom.
I have included 2 versions. I do not care to use gridfinity with magnets, so I have uploaded versions with and without space for magnets, this is noted in the file names. The improved figures listed above are for the magnet-less version. You will still see significant savings with the magnets but not as much.
Important Note:
This is using the 5x4x6U Parametric V1 file, not the original, which uses a different hinge.
-------------------------------------
special thanks to Pred for this awesome project, you did great work!