Balisong, Butterfly Knife Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
7/19/23 UPDATE: I have uploaded the individual pieces for easy replacement part prints. V4.1 is a newer, smaller…
- Ocena
- 5 / 5
- Polubienia
- 230
- Pobrania
- 1322
- Wydruki
- 3
- Wyświetlenia
- 7688
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
7/19/23 UPDATE:
I have uploaded the individual pieces for easy replacement part prints.
V4.1 is a newer, smaller version. Much easier to handle
This pen holder was designed to be used with a 9mm OD pen. I'm sure you could scale the whole thing up or down if need be. Construction is pretty straight forward.
No extra hardware is needed.
You can print this without supports with the correct settings. The bridges aren't to bad.
Uses about 46g of filament with supports.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.12
Infill:
10-20%
Category: Mechanical Toys