1 / 3
Weight box for HO scale railway cars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box to be filled with shot gun pellets to give the cars a good running weight. with one layer of pellets it weighs about
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 898
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (28)Powiązane
To get your cars to run properly they need a bit of weight, especially if theyre 3D printed.
Filled with one layer of pellets it weighs about 50gr.
I poured glue into the compartments first then the pellets.
0.30mm layer height works well, can be printed with 0.8mm nozzle too.