Picatinny "lurker" foregrip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foregrip I initially threw together as a bit of a joke - a copy of another popular existing copy.
- Ocena
- 4,5 / 5
- Polubienia
- 164
- Pobrania
- 1221
- Wydruki
- 3
- Wyświetlenia
- 4074
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Disclaimer: I made this as a shitpost, I didn't expect it to be particularly useful, and somehow it's been found usable nonetheless. I imagine there are better designs, but thank you for considering mine regardless.
Foregrip I designed, based on some other popular existing designs.
Mounts on picatinny rails.
My goodness, was my print quality awful at the time of this print.
V2: Added filled core version to potentially make this more printable
V3: Didn't like how much gap there was, made the fit a bit wobbly IMO, and added a curve for reduced stress concentration
Print instructions:
If you're printing V3, I don't think it'll work as a single print (not enough clearance between layers), so you'll have to separate the parts (right click in most slicer software, look through options).
Turns out if you use PLA and 3 wall layers, it'll snap in load-bearing cases, (e.g. nerf springer priming), you'll likely need more.
Hardware:
M3x30 (I think? Maybe longer) bolt x2
M3 nut x 2
Category: Sport & Outdoors