1 / 3
Ilife H70 vacum wall holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My holder got broken after some time. I have created similar one that works fine.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
My holder got broken after some time. I have created similar one that works fine. The printing method was set on speed over quality and I forgot to set the correct table temp therefore edges of the printed model are bent. Of course if you like, you can do quality printing.
On one of the pictures you can see comparison of the original holder and the printed one.
