P.E.T.W. (Pruse enclosure tool wall)

This is a model that will allow you to take your tool wall as close to your printer as possible.

It consists of a baseplate, hooks, and a hinge. The baseplate can be screwed directly to the enclosure in any direction/face, or suspended by a fixed or hinged hook system.

My initial idea was to create a toolbox that would store not only regularly used items, but also all the items that we store somewhere in a box (nozzle, hotend, screws, etc.). In order not to reinvent the wheel, I started with a "gridfinity" base, but it had to adapt to the Prusa Enclosure, be as universal as possible and with the smallest footprint.

Model description

• 3 mount sytem :
  • by screw 
  • 
  • by hook 
  • 
  • by hinge 
  • 

• These 3 mounts can be mounted on any face/angle of the Prusa enclosure.

Print

I recommend using the 3mf file where everything is set up. In my case, I used PETG for the temperature and UV resistance (but you can also use PLA).

• Screw fixation :
  • print :
    •  Baseplate => 0.2 quality 4 wall, 30%+ inflill
  • assembly :
  • 5 M3*6 screws (or more) are required to secure the base plate to the enclosure.
    The design allows it to be mounted on any of the lateral faces and at the 4 corners (see the cutouts).

• Hook fixation :
  • print :
    • Baseplate => 0.2 quality 4 wall, 30%+ inflill
    • Hook kit => 0.2 quality 4 wall, 30%+ infill
  • assembly :
    • Assemble the "baseplate" with the "hook male" with 8 M3*6 screws.
    • Install two M3 inserts in the upper part of the "hook male".
      I left some space in the hole to make it easier to install them without solder tips.
    • Assemble the handle with the hook male with 2 M3*6 screws (or more).

• hinge mount : (feature of the hook fixation)
  • print  :
    • Baseplate => 0.2 quality 4 wall, 30%+ inflill
    • Hook kit => 0.2 quality 4 wall, 30%+ infill
    • hinge kit (left/right) => 4 perimétre, 40%+ remplissage
      left or right depend the position where you want the hige
    • print tag => 0.2 quality 
      You can change the text and the color change are setuped
  • Assembly
    • Secure the fixed part to the enclosure using 2 M3*6 screws (or more).
    • Use the remaining 3*20 rod from the enclosure kit to close the hinge.
    • Glue your tag name over the mobile hinge
    • 

• Grifinity :
• You will need 180 6*2 magnet for fill all slot (80 for baseplate 80 for the box) and glue
• this system provide also “drag and drop box” feature over all the metal part, you can place for exemple a grifinity box nearest possible to your printer 

Unfortunately, I'm short on time and haven't been able to print the Gridfinity boxes yet for the prusa enclosure challenge. But you can find all you need on Printables with the keyword "gridfinity".

I hope this model model can you help during the maitenance session and have nice print.