Seeed Studio XIAO ESP32C3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A CAD asset for the makers
- Ocena
- 4,75 / 5
- Polubienia
- 49
- Pobrania
- 1738
- Wydruki
- 0
- Wyświetlenia
- 4215
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be found here.
It is intended for makers building electronics to include in their design process, as it removes the extensive process of measuring this part to fit when designing your wonderful lamps/clocks/robots/etc.!
If you build something and use this as an asset, please make me happy by posting it in the makes section!
Tolerances
When designing things using this model in my experience adding 0.2mm around the board will lead to a tight fit that holds the device in place. However, your boards may have slight differences depending on the batch, or perhaps your printer settings will mean more or less of a gap is needed. 0.2mm is probably a good starting point.
Safety Note
This device gets a little warm, and has an unpopulated relatively large thermal pad on the underside. If you are going to enclose it please consider adding a heat sink and ventilation.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨