Parametric Ball Joint to GoPro Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric GoPro mount adapter for use with ball joints - originally designed to work with DJI Osmo Action 360°.
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 323
- Wydruki
- 1
- Wyświetlenia
- 1534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
An adapter that allows you to mount your GoPro style mount compatible action camera to a ball joint.
This adapter was original designed for DJI Osmo Action ball joint mounting accessories using 14mm ball joints. As these mounts use magnetic quick connect mechanism, they are not compatible with GoPro style mounting camera cases - such as the diving case.
Ball Joint:
- Osmo Action (14 mm)
- 1" (25 mm)
Style:
- Curved - more clearance for the case
- Strait
Width:
- Wide - 24 mm
- Narrow - 16 mm
Printing:
Supports: Required
Adhesion: Raft recommended
Infill: 100%
Layer height: ≤ 0.15 mm
Print orientation: Ball up
Good layer adhesion is required. Therefor it's recommended to use materials like Nylon or PC. PETG might work in a pinch.
Additional hardware:
To complete the part, you need single M8 hex nut, and a little bit of superglue to secure it in the part.
OnShape document:
All dimensions meant to be changed are defined in configuration studio.