Water Tank Splatter Guard for Gaggia Classic / Pro / Evo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep coffee splatter (especially from bad channeling pulls) from entering the water tank and causing grime buildup.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 218
- Wydruki
- 1
- Wyświetlenia
- 2699
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This simple 3d print was created to cover the gap between the water tank and Gaggia Classic body and prevent coffee splatter from entering the water tank. Doing this prevents gunk buildup at the bottom of the tank considerably, keeping your water cleaner and tasting better longer.
I originally used risers below the tank, however raising the tank affects the ToF sensor integration with Gaggiuino due to its dead zone. Keeping the tank at stock height lets me fill in more water before reaching the sensor dead zone.
The print doesn't need supports or brims (highly advise against brim), and should be printed with the two legs toward the bed rather than the STL orientation. After printing it should sit securely on the top of the tank with a gentle push downward.
I printed this with a Prusa Mini and Prusament PETG.
The 2nd picture has the tank pulled out so you can get a slightly better view of the print on the tank.