Settlers of Catan Resource and Development Cards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully printed Settlers of Catan cards. (Multi-material only)
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 284
- Wydruki
- 0
- Wyświetlenia
- 1611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
IMPORTANT!
Watch the slicing tutorial if you do not have a dual extruder or something similar!
Description
Cards that are roughly the size of the original Settlers of Catan resource cards.
The cards, when printed in PLA, feel and handle in a very card-like manner. With some light sanding they would be exactly like thick playing cards.
These were printed using the Prusa Multi Material Unit v2 but could probably be printed without one if you did some careful slicing.
Note: these cards are specifically designed to be printed at a .2mm layer height.
As always, I've included the Fusion 360 files as well as any SVGs that were used. Feel free to iterate on this!
The official wiki states that the following card counts are needed:
| Card Name | 3-4 Players | 5-6 Players |
|---|---|---|
| Resource Card | 19 of each (95 total) | 24 of each (120 total) |
| Largest Army | 1 | 1 |
| Longest Road | 1 | 1 |
| Knight | 14 | 20 |
| Year of Plenty | 2 | 3 |
| Monopoly | 2 | 3 |
| Road Building | 2 | 3 |
Slicing tutorial for those without an MMU/AMS: https://youtu.be/TuZaGDrxwbM
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
N/A
Filament: N/A PLA Black and White