Milk Crate Fishing Pole Rod Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your fishing pole to a $10.00 Milk Crate from “The Container Store” SKU#: 280070 and then mount the milk crate to
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 1388
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mount your fishing pole to a $10.00 Milk Crate from “The Container Store” SKU#: 280070 and then mount the milk crate to a bike.
If you happen to be mounting the milk crate to the rear rack of a Rad Power Mini eBike or even a Rad Rover, i have created a mounting solution you can find here:
https://www.printables.com/model/562827-milk-crate-mount-for-radmini-rear-rack-ebike
If you happen to be mounting the milk crate to the rear rack of a Lectric XP 2.0, i have created a mounting solution you can find here:
https://www.printables.com/model/562824-milk-crate-mount-lectric-xp-20-rear-rack-ebike
For best results and heat tolerance, print in PETG. This is a friction fit component and requires a calibrated printer for best results.
Print one of each and two spacers.
Requires:
2 M5x20mm socket or pan head bolts
2 M5x25mm socket or pan head bolts
4 M5 Nuts
Print at .20 layer height
15% Gyroid Infill
4 walls
6 top & Bottom Layers
No Supports
Use a brim on the spacers and rod holder if you want to. I did not.