1 / 8
The Owl House Latissa Police Precinct — zdjęcie 1
1 / 8

The Owl House Latissa Police Precinct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model of the Latissa Police Precinct / Hospital from The Owl House

Ocena
5 / 5
Polubienia
18
Pobrania
50
Wydruki
2
Wyświetlenia
257
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a model of the Latissa Police Precinct from The Owl House. This building later became a hospital. Likewise, this model comes in two variants - police precinct and hospital.

The model is at 1:270 scale. It is 166mm wide, 130mm long, and 130mm tall. The hospital-variant is only 153mm wide, 130mm long, and 115mm tall.

The police precinct has tall spikes on the top of the roof, two emperor's coven banners on either side of the door, and stakes alongside the base.

The hospital has a banner over the door.

Print Instructions

Printed at 0.2mm layer height. No supports required. I've used lighning infill.

The model has some vertical struts, marked red in the following image. Those are meant as temporary supports. You can remove them when the print is finished. They are on either side between the flat and slanted roof.

 

 

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

Tagi