QuinLED Dig Quad LED Controller & Meanwell Power Supply Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Dig-Quad LED controller and Meanwell LRS-350-24 power supply, with 2mm banana plug back panel.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 1325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Case for Dig-Quad LED controller and Meanwell LRS-350-24 power supply, with 2mm banana plug back panel.
There are three parts, the base, a lid, and a bridge that supports the Dig-Quad. The board can be screwed onto the board using m2.5 heat-set inserts and m2.5 screws.
The back panel accepts seven positive and negative 2mm banana plugs and and four data channels.
Putting it together is pretty self explanatory, this is what you will need:
* 4 x m2.5 heat set inserts
* 4 x m2.5x4 screws
* 7 x red 2mm banana plug jacks
* 7 x black 2mm banana plug jacks
* 4 x green 2mm banana plug jacks
* 1 x snap-in IEC plug (27mm x 40 mm profile)
* 18 x ferrule connectors
* Relevant spade connectors depending on the style of banana plugs purchased.