Longer Filament arms for Multiple Mechanism Auto-Rewind Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I need a longer Filament arm for this holder. There are three variants of the longer arm. One with M6 thread for…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 917
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I need a longer Filament arm for this holder. There are three variants of the longer arm. One with M6 thread for PC4-M6 Festo fitting, second with thread for PC4-01 fitting and third with bare hole for PC4-01 fitting.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.15 mm - 0.3 mm
Infill:
15 %
Filament: Gembird PLA Grey
Notes:
The threaded parts are better to print at lower layer height (0.1 - 0.15 mm) to get smooth threads and holes. The third variant with bare holes prints OK at 0.3 mm layer height.
Little sanding of rough layer at rounded mount area of the stand was necessary for nice fit of the arm. If using the bare hole variant use the PC4-01 fitting to cut the thread in the hole itself. Safe the arm in place with a M4 bolt and nut.
Category: 3D Printer Accessories