AtGames Legends Pinball Plunger Potentiometer Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
instead of buying a new plunger, I decided to make my own that slips over the stock bracket.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
For those of you that are gutting the ALP internals and going full OTG, instead of buying a new plunger (which usually uses a slide potentiometer) I decided to make my own that slips over the stock bracket. The back plate screws to the stock bracket (to keep the front aluminum plate on) and you can use the 4 other holes for wood screws to mount securely to ALP. Best part is you can use your stock plunger and screws. Just need a 100mm linear potentiometer.
For personal use only. Non-commercial
If you don't have a 3D printer, the parts can be purchased here: https://www.etsy.com/listing/1242768793/atgames-legends-pinball-potentiometer
This was originally uploaded on Thingiverse.