1 / 2
Extruder cable clip -enforced- for Prusa i3 mk3s
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enforced small clip that holds the extruder cable in position - original design by Yosuke.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 148
- Wydruki
- 4
- Wyświetlenia
- 465
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (29)Powiązane
I used the original design from Yosuke for about 1.5 years, when the main cable ring broke.
Slight change in design: I increased the material thickness of the ring and scaled the Z direction x1.3 up, to get more stability. Must be printed with PETG, since PLA (is too stiff) might break during install.