Tea-Lighthouse 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a lighthouse that has a spot for a tea light to be placed in the top.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 133
- Wydruki
- 2
- Wyświetlenia
- 611
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of a lighthouse that has a spot in the top where a tea light can sit. This allows light to come out of the top of the lighthouse. The tea lights that I used have a base diameter of 1.4in and a height of 1.6in.
I printed part 1 with a fuzzy skin modifier with default settings. For all parts I used PLA, a .6mm nozzle, and a .3mm layer height.
For the clear window at the top I used clear PETG, and printed in vase mode with a .45mm layer height and the cooling fan turned off.
I used superglue to attach models 2-4. All of the models have alignment pieces so they should all align together without any issues.
This lighthouse is modeled after Great Point Lighthouse on Nantucket Island, USA.
Tea-Lighthouse 1: https://www.printables.com/model/563722-tea-lighthouse-1
Tea-Lighthouse 3: https://www.printables.com/model/563740-tea-lighthouse-3