Finger Loop Hobby Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hobby knife for more precise and delicate tasks.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 264
- Wydruki
- 3
- Wyświetlenia
- 1009
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Hobby knife with a finger loop for more precise and delicate tasks. It was inspired by one I saw on Amazon but designed it from scratch/remixed it from the Inexacto Hobby Knife.
Print the modified sleeve if the blade is too loose. It's been lengthened to catch the blade edges and provide more stability.
Disclaimer: Obviously hobby blades are sharp, be careful!
Please post your prints! I'd love to see them!
If you'd like to support me please check out my filament wishlist here or Paypal here
Updates
4/9/2021: Added a modified sleeve for any slippery blades. Successfully test printed the 4-way holder
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20% and 100% (Knife holder part)
Filament: Hatchbox PLA Orange
Notes:
I used a brim, 3-4 shells, 20% infill (100% for the knife holder part)
Note: For the knife holder part it's probably best to use 4 shells and bump up the infill (possibly best to 100%). Especially if you want to tighten it down a lot.Hobby_Knife_Holder.stl and Hobby_Knife_Sleeve.stl are from the original Inexacto hobby knife
I didn't have difficulty with mine but one of the makes mentioned difficulty getting the threads to work until printing it in this orientation.
Category: Hobby