1 / 3
Soundcore+ Vesa Mount Brackets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Have a laptop that lives on a gas mount VESA arm. Wanted to hang my Soundcore+ speaker from the bottom on the unused VESA mount holes.
It's designed to attach to the backside of the VESA mount with a slight angle on it so that the speaker will angle down. Used fseme's model to help properly grasp the speaker since it's built with curvature, though slightly thickened.
Each bracket is 19mm wide with only one mount hole so you can use either the VESA 75 or the VESA 100 holes.
Print size of the STL is 99mm x197mm x19mm
Used M4 bold and nut to attach to the backside of the mount.