Bostitch Pencil Sharpener Bucket Replacement (V3.0 is here!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pencil sharpener bucket replacement for a Bostitch pencil sharpener! And an upgrade to a button!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
My school was missing a pencil sharpener bucket, so I made one so that they don't need to find a donor or replace the entire unit!
Print with PETG for best results on the mechanical parts!
Made to fit a 1.5 Inch diameter twist socket!
(The photo is an old prototype)
Use a soldering iron or a hot glue gun tip for welding the parts together!
Weld the mechanism to the front plate first! That way you don't accidentally weld the front plate to the bucket first! Requiring you to risk breaking the print or reprint it all over again!
Set your soldering iron to 250C if possible!
Or set your hot glue gun to its highest temperature if possible!
(You can use the 3.0 pin on the 2.0 version! The only differences is that the 3.0 pin is a more rod like pin, and the 2.0 pin is more of a layered rod, risking the odds of breaking!)
I mainly print these in clear filament now, because I like that you can just rinse them with hot water and they appear more clearer!