Tuya Zigbee Wireless Multi Mode Hub Gateway
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought this little Zigbee hub gateway to add smart devices to my home, and it was laying around without a proper…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought this little Zigbee hub gateway to add smart devices to my home, and it was laying around without a proper place. I've decided to create a simple support to allow me to stick it to a wall.
So, I've printed mine in white PETG, with 0.2mm, and it's almost invisible. It's so light, that all you need is a small piece of double sided tape.
Zigbee hub link: https://www.aliexpress.com/item/1005005234485826.html?spm=a2g0o.order_list.order_list_main.77.21ef1802Tki4JY
Print Settings
Printer:
Tevo Tarantula
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
Doesn't matter
Filament:
Sunlu PETGWhite
Notes:
Once it's thin, you don't need to worry about infill. If your printer doesn't do a good job printing the corners without supports, you can add. Won't make too much difference in print time.
Category: Other