Business Card Holder for Ortur Slotted Laser Bed, revision 2.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of my original. This one can be turned 90°, and is 100mm on a side. It is also harder to print.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a remix of the original with two key changes.
First, it is 100mm on a side, making stacking it along both the X and Y axis, and calculating the offset when you want to engrave multiple cards at once, simple.
Second, the slots in the bottom now run both ways. This is a mixed blessing. It can be turned 90° on the laser bed, which might be useful, but you will now need glue stick to print it. I'm not sure it was worth it, but I'm a bit of a completionist, and I was already adjusting the dimensions.