Clodbuster Upper 4 Link Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have printed and run several of the upper link mounts that are floating around and have broken every single one.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 564
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I have printed and run several of the upper link mounts that are floating around and have broken every single one. They rely too much on layer adhesion for strength. So I designed this one to literally hook the gear box and use a single screw with a recessed nut to secure it. Print at 215C with 100% infill for maximum strength. I added a 3mm hole in the bottom of the mount to secure a rod style rear lock out or you can print the one pictured from my other files.
Print instructions
Category: 3D Printing Summary
I have printed and run several of the upper link mounts that are floating around and have broken every single one. They rely too much on layer adhesion for strength. So I designed this one to literally hook the gear box and use a single screw with a recessed nut to secure it. Print at 215C with 100% infill for maximum strength. I added a 3mm hole in the bottom of the mount to secure a rod style rear lock out or you can print the one pictured from my other files.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
</div>Rafts:No
Supports:
Doesn't Matter
</div>Resolution:0.2
Infill:
100
</div>Filament:
Overture PLA Black