1 / 10
Bambu Lab Poop Chute - Minimal
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw in excess chute for Bambu Lab X1 and P1 machines. It's low volume makes it cheap and fast to print.
- Ocena
- 4,941 / 5
- Polubienia
- 123
- Pobrania
- 1328
- Wydruki
- 21
- Wyświetlenia
- 4188
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 21) (Komentarze: 25)Remiksy (0)Kolekcje (171)Powiązane
Requirements
This is a ,light weight and quick to print, “Poop Chute” that requires NO post processing.
It's attached with the screw that is already on the machine, so the only thing you need is an allen wrench.
Print Settings
You can print it with your normal settings with 0.4 or 0.6 nozzle. No supports. Pre-oriented.
It takes around 30 to 60 minutes to print.
Tips
- You can orient the part so that the top surface lines aligns with the direction of the chute, to help the poop slide more smoothly.
- Do not over tighten the screw.
Extra Features
- Curved end to deflect material away from the wall so it does not bounce on the lip of the trash bin or tray.
- Low profile for anyone putting their machine super close to the wall.
- Sloped enough to let the material slide down but still has room for a decently sized tray to sit right next to the machine.
* It does not come with a bucket.
* Requires more testing.
I uploaded the f3d file.